Planning Guide
Hoistway Construction Notes
- Minimum overhead clearance inside
the hoistway is 48" above the upper level sill height. The
typical sill height is 36" above the floor level.
- Hoistway sizes reflect running and access clearances
only. Consult your local authority to assure compliance with
state local codes.
- Hoistway walls to be plumb and square.
- Hoistway door provided by others.
- Machine access door provided by others.
|
| |
| Summit Lifts, Inc. designs their lifts
to meet the stringent requirements of ASME A17.1 when installed properly.
Those wishing to acquire these products need to check with local authorities
to assure local code compliance, installation requirements, and to
determine if permits are required |
|
|
|
